High Temperature PCB Plating Masking tape is a heat resistant single sided tape used for PCB plate masking. The product is a low adhesion means no residue after removal. It is laminated with PET Release Liner and can be supplied as die cut. High Temperature Masking Tape is an excellent heat resistance & chemical resistance acrylic adhesive single sided masking tape/film that is used for gold plating in FPCB manufacturing. It is easy to peel off (Less adhesion) means less contamination to adhered substrate. The silicone based adhesive adheres well to most metal alloys; simply apply firm pressure to the tape on a clean, dry surface. However, because plating is an immersion process, there are some techniques that will help ensure clean masking lines after parts are plated. High Temperature resistance P.C.B Masking Tape, is designed to meet the requirements for the advanced printed circuit board technologies in polypeptide backing for masking gold fingers or selected PCB areas during wave solder. Masking tape, also known as painter’s tape, is a type of pressure-sensitive tape made of a thin and easy-to-tear paper, and an easily released pressure-sensitive adhesive. It is available in a variety of widths. It is used mainly in painting, to mask off areas that should not be painted. The adhesive is the key element to its usefulness, as it allows the tape to be easily removed without leaving residue or damaging the surface to which it is applied. The tape is available in several strengths, rated on a 1–100 scale based on the strength of the adhesive. Most painting operations will require a tape in the 50 range. Household masking tape is made of an even weaker paper and lower-grade adhesive.