Polyester Tape are clean removing, and high-temperature silicone adhesive with tough, non-slivering polyester backing. The tape is blue with 1.0 mil polyester backing, works up to 400°F, and offers clean removal during high temperature masking operations. It features thin, high tear-resistance, good temperature resistance, long-term aging, and high-strength backing. Polyester tape is well suited for applications such as electronics, automotive, aerospace, general industrial, web processing, solar, composites, military, appliance, and transportation. It can be used for splicing, insulating, edging, reinforcing, protecting, sealing, flash breaking, tabbing, roll closing, powder coat masking, and anodizing. Silicone adhesive provides clean removal from a variety of surfaces. Polyester (PET) Tape with Silicone Adhesive is used for high temperature masking tape. Used in Powder Coating, Spray coating, Plating, Electroplating, Anodizing, high temperature splicing tape. (Polyimide) Tape (-100F to +500F) is used when temperatures are higher than the temperature range of Polyester (up to 310F). Silicone Adhesive Tape is a highly heat resistant plating masking adhesive tape with a thick adhesive layer applied to a polyester film. Adhesive tape refers to any one of a variety of combinations of a backing materials coated with an adhesive. BoPET (Biaxially-oriented polyethylene terephthalate) is a polyester film made from stretched polyethylene terephthalate (PET) and is used for its high tensile strength, chemical and dimensional stability, transparency, reflectivity, gas and aroma barrier properties, and electrical insulation. Different backing materials and adhesives can be used depending on the intended use. Self-amalgamating tape is a non-tacky silicone-rubber tape which when stretched and wrapped around cables, electrical joints, hoses and pipes combines or unites itself into a strong, seamless, rubbery, waterproof, and electrically insulating layer.